CARBON FOR INDUSTRY
Reliable Strength with Repeatable Quality
Tubes with standard section can be produced in high volume at low cost.
These tubes offer high strength, low weight and reproduceable stiffness - when compared with alloy tube.


IF YOU HAVE A PRODUCT THAT COULD BENEFIT FROM INCREASED STRENGTH AND REDUCED WEIGHT PLEASE CONTACT US.
Applications
MOTOR CYCLE EXHAUST PIPES (subject to temperature limits)
FLAGPOLES
TAPERED TUBES,
INTERNAL SLEEVING,
DRAINAGE TUBES,

TELESCOPIC POLES FOR TRANSPORT,
LOW WEIGHT STRUCTURAL SUPPORTS,
MASTS AND SPINNAKER POLES,
CANOE PADDLE TUBES,
FISHING RODS.
Production features
Pre-preg process with inside diameter 6.4mm to 127mm.
There is no limit on the thickness of the wall.
The maximum length without jointing is 5.25 metres.
Finish is smooth, varnish, or smooth white.
Localised stiffening can be introduced for support or joining areas.
Internal sleeving allows for increased stiffening, or jointing.
Stiffness is controlled by a variation of lay-up, thickness and material
.
General
Tubes are made from pre-preg materials, rolled onto an internal mandrel, wrapped in pressure tape and oven baked.
All resins are epoxy and carbon is T600 or T700.
Construction
CG tubes have the following construction:
2 layers of 224gm/m of glass at 90degrees
3 layers of 300gm/m carbon at 0 degrees
Other lay ups and sizes are available
Usable temperature range
-20 to +100 degrees Celsius
Above +110 Celsius and at maximum load the tubes will become increasingly plastic and creep

Standard Carbon Tube Sizes (* means stocked)

Code I.D.
mm
O.D.
mm
Wall
mm
Stiffness
KNm²
Weight
Kg/m
Max. Length
m
CG100/127 10.00 12.70 1.35 0.04 0.075 2.00
CG125/152* 12.50 15.20 1.35 0.09 0.09 2.00
CG140/167* 14.00 16.70 1.35 0.12 0.10 3.00
CG180/208 18.00 20.80 1.40 0.32 0.14 2.50
CG190/218 19.00 21.80 1.40 0.37 0.15 4.00
CG222/250* 22.20 25.00 1.40 0.57 0.17 3.00
CG265/293 26.50 29.30 1.40 0.96 0.21 4.00
CG285/313* 28.50 31.30 1.40 1.18 0.22 2.50
CG320/348 32.00 34.80 1.40 1.66 0.25 2.00
CG350/378* 35.00 37.80 1.40 2.55 0.27 2.50
CG381/409 38.10 40.90 1.40 2.76 0.30 3.00
CG420/448 42.00 44.80 1.40 3.67 0.33 2.00
CG460/488 46.00 48.80 1.40 4.76 0.36 2.00
CG475/503 47.50 50.30 1.40 5.26 0.37 3.50
CG508/540 50.80 54.00 1.60 9.17 0.57 5.00

Normally stocked length is 2.5m. Please ask for current stock.

Please ask if you need a different size, length or layup.

 

INSIDE DIAMETER SIZES OF STANDARD CARBON TUBES (mm):-

6.4
7.9
8.0
9.5
10.0
10.5
11.1
12.0
12.5
12.7
13.0
14.3
15.0
15.9
18.0
19.0
20.0
22.2
23.0
24.0
24.4
25.0
25.4
26.0
26.5
27.0
27.8
28.0
28.5
30.0
31.7
32.0
33.2
34.9
35.0
37.0
37.2
38.1
40.0
41.3
42.0
44.4
46.0
47.5
50.0
50.8
56.0
60.3
63.5
66.7
70.0
76.2
79.4
82.5
85.0
85.7
95.0
99.2
103.0
106.7
108.0
110.0
125.0
127.0
135.0



THE WORLD'S LARGEST SELECTION OF CARBON STANDARD TUBE SIZES